Ysi 9500 Photometer Manuel d'utilisateur télécharger pdf (Page 12)

1024

Sample Number

Enter or confirm the sample number (up to 10 digits), then press [OK].

4 If the dilution factor option is pre-selected, then the following display will

appear :-

x 1

Dilution Factor

Press [OK] to accept the default value (x1, no dilution), or key in new

dilution factor then press [OK].

5 The following display will now appear :-

Chlorine-Free / 5

Phot 007

Insert Blank

Choose a Test

Place a BLANK TUBE in the test chamber, then press [OK].

If the instrument is in continuous use mode, it is advisable to re-blank from

time to time.

NOTE: The instrument is designed to hold the blank setting as long as the instrument is switched

on. This stage will be omitted when further tests are being carried out. However, when changing

to a test which requires a colored or reagent blank, or uses a tube of a different diameter, the

‘Insert Blank’ prompt will be displayed.

6 The instrument will be set automatically, and after a few seconds the

following display will appear :-

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Ysi 9500 Photometer Manuel d'utilisateur Page 12